Kyocera ECOSYS P6021cdn Operation Manual page 114

>Job Name
? Off
Job Name (The Job Name display settings)
Set whether the job name set in the printer driver is displayed.
1
Press  while Print Settings > is displayed.
2
Press  or  repeatedly until >Job Name appears.
3
Press [OK]. A blinking question mark (?) appears.
4
Press  or  to display the job name to be used.
Off
Job Name (Use the job name set in the printer driver.)
Job No.+Job Name
Job Name+Job No.
5
When the desired job name is displayed, press [OK].
6
Press [MENU]. The display returns to Ready.
4-46
Using the Operation Panel