Kyocera ECOSYS P6021cdn Operation Manual page 131

>>Date (Year/Mon/Day)
2013 / 01 / 01
>>Time (Hour:Min:Sec)
11 : 19 : 21
>>Date Format
? Month/Day/Year
Date (date setting)
1
After entering the administrator ID and password, press  or 
repeatedly until >>Date (Year/Mon/Day) appears.
2
Press [OK]. A blinking cursor (_) appears.
3
Use the arrow keys to set the year, month, and day. Press  or  to
increase or decrease, respectively, the value at the blinking cursor.
Use  and  to move the cursor right and left.
Note The order in which the year, month, and day appear varies
depending on the Date Format (date format selection) on page 4-
63.
4
Press [OK].
5
Press [MENU]. The display returns to Ready.
Time (time setting)
1
After entering the administrator ID and password, press  or 
repeatedly until >>Time (Hour:Min:Sec) appears.
2
Press [OK]. A blinking cursor (_) appears.
3
Use the arrow keys to set the hour, minute, and second. Press  or
 to increase or decrease, respectively, the value at the blinking
cursor. Use  and  to move the cursor right and left.
4
Press [OK].
5
Press [MENU]. The display returns to Ready.
Date Format (date format selection)
One of three formats can be selected for the date format.
1
After entering the administrator ID and password, press  or 
repeatedly until >>Date Format appears.
2
Press [OK]. A blinking question mark (?) appears.
3
Press  or  to select Date Format. The following date formats
can be selected:
Month/Day/Year
Day/Month/Year
Year/Month/Day
4
Press [OK].
5
Press [MENU]. The display returns to Ready.
4-63
Using the Operation Panel