Restorer; Night Mode; Audio Delay - Denon AVR-2309CI Owner's Manual

ENGLISH
The default setting for "iPod" is "Mode3". All others are set to "OFF".
RESTORER
When set to something other than "OFF",
"1mB"
is displayed.
Mode1
(RESTORER 64):
Optimized mode for compressed sources with very weak highs.
Delay audio.
This sets the delay time for audio signals.
[Variable range]
I
0 ms
I -
200 ms
Audio Delay
Compensate for mismatched timing between video and audio.
If you wish to adjust the "Audio Delay" while playing HDMI or
component video signals, press 6. to set "OSD" to "OFF". This way
the audio delay can be adjusted while watching the picture. (Press
6.
again to switch to the on-screen display.)
~
Operating from the main remote control unit
Press
[AUDIO DELAY]
• This cannot be adjusted when playing in the EXT. IN, DIRECT or
STEREO mode (with "Front Speaker" set to "Large", "Tone
Control" to "OFF" and "MultEO", "RESTORER" and "Night Mode"
to "OFF")
• When the auto lip sync correction function is operating, you can set
within the range 0 - 100 ms.
• Store" Audio Delay" for each input source.
.N.U_
• When operating by remote control, the onscreen display is not
shown.
Mid
----~
High
------ Low
C
OFF
- -
~
Operating from the main remote control unit
Press
[NIGHH
The
"DmmI"
indicator lights when "Low", "Mid" or "High" is
selected.
Mid
Middle setting.
High High setting.
Set the dynamic range compression of the output audio.
Night Mode
Optimized setting for late-night listening.
[Selectable items]
~:
Turn night mode off.
Low
Low setting.
.N·U-
• When the" Dynamic EO" setting is "ON ': setting is not possible.
• When the "Dynamic Volume" setting is "ON'; setting
IS
not
possible.
• When a HD-Audio (DOLBY DIGITAL Plus, DOLBY TrueHD, DTS-HD)
signal is input. the "Night Mode" can not be selected.
Mode 2
(RESTORER 961
L _ _
O _F_F_-------__ Mode 1
(RESTORER 64)
Mode 3
(RESTORER HO)
This function restores compressed audio signals to how they
were before compression and corrects the sense of volume of
the bass and treble to obtain richer playback sound.
[Selectable items]
OFF
Do not use RESTORER.
Mode2
(RESTORER 96)
Apply suitable bass and treble boost for all compressed sources.
Mode3
(RESTORER HO)
Optimized mode for compressed sources with normal highs.
~
Operating from the main unit or main remote
control unit
Press RESTORER
I
About the RESTORER function
• Such compressed audio formats as MP3, WMA (Windows Media
Audio) and MPEG-4 MC reduce the amount of data by eliminating
signal components that are hard for the human ear to hear. The
RESTORER function generates the signals eliminated upon
compression, restoring the sound to conditions near those of the
original sound before compression. It also corrects the sense of
volume of the bass to obtain richer sound with compressed audio
signals .
• This is displayed on the menu and can be set when the input source
is selected to "XM ': or analog signals (including AM/FM and SIRIUS
signals) or PCM signals (fs = 44.1/48 kHz) are Input.
When the surround mode is set to "neural", the "RESTORER" can
not be selected.
51
I
For details on adjusting individual parameters, see "Adjusting the parameters" Ill2Fpage 461.