Ouick Select Name; Trigger Out - Denon AVR-2309CI Owner's Manual

ENGLISH
II
Source Delete
Remove input sources that are not used from the display.
[Selectable items]
ON
I:
Use this source.
Delete :
Do not use this source.
Default
Resets the settings to the default values.
-N·n=-
• Input sources being used in the various zones cannot be deleted.
• Input sources set to "Delete" cannot be selected using
SOURCE
SELECT.
D
On-Screen Display
Make on-screen display related settings.
Master Volume
Master volume display during adjustment.
[Selectable items]
I
ON
I:
Turn display on.
OFF :
Turn display off.
Tuner Information
This sets the time the on-screen display is displayed when a tuner
operation is performed.
[Selectable items]
Always
Show display continuously.
I
30sec
I:
Show display for 30 seconds after operation.
10sec
Show display for 10 seconds after operation.
OFF :
Turn display off.
iPod Information
II
Quick Select Name
Change the Quick Select name.
Up to 16 characters can be input.
[Input characters]
A .. Z a .. z 0 .. 9 ! # % &. ()
*
+, -./:; ="?
@ [\]
(space)
Default
Resets the settings to the default values.
II
Trigger Out
Select the conditions to turn on the trigger out with respect to
the zone, input source, surround mode, etc. For details about the
trigger out function, see page 20.
Selecting the Zone
Select the zone for which the trigger out is set.
I
Screensaver
This sets the time the on-screen display is displayed when an iPod
[Selectable items]
operation is performed.
All
MAIN ZONE2
Make screensaver settings.
Use the screensaver to prevent burn-in on the monitor screen.
When set to "ON", the screensaver is activated if there is no activity
for about 3 minutes.
[Selectable items]
ON :
Activate the screensaver if there is no activity for about 3
minutes.
OFF :
Turn the screensaver function off.
Text
Input source and mode display.
[Selectable items]
I
ON
I:
Turn display on.
OFF :
Turn display off.
[Selectable items]
Always
Show display continuously.
I
30sec
I:
Show display for 30 seconds after operation.
10sec :
Show display for 10 seconds after operation.
OFF :
Turn display off.
Display Mode
Select the on-screen display's display mode.
[Selectable items]
I
Mode1
I:
If there is no video signal, flickering of the on-screen
display is not prevented.
Mode2 :
Prevents flickering of the on-screen display when there is
no video signal.
Use this mode if the on-screen display does not appear
in the Mode 1, as may happen according to the TV being
used.
Setting with Respect to the Input Source
When the input source set to on is selected, the trigger out turns on.
[Selectable items]
ON
Activate trigger on this mode.
Do not activate trigger on this mode.
Setting with Respect to the Surround Mode
• When the surround mode set to on is selected, the trigger out turns
on.
• Associated with respect to surround modes that are set to "ON".
• This can be set if the "MAIN ZONE" is selected at "Selecting the
Zone".
• Associated when an input source for which "Setting with Respect to
the Input Source" is set to "ON" is selected.
[Selectable items]
ON :
Activate trigger on this mode.
: Do not activate trigger on this mode.
For details on how to select, set and cancel settings for each menu, see "Menu Operations" (iGT'page
22).1 36