Denon AVR-2309CI Owner's Manual page 33

ENGLISH
Surround Speaker
Select surround speakers use and size.
[Selectable items] Large
I Small
I
None
Surround Back Speaker
Select surround back speaker use and size.
[Selectable items] ( Large
I Small
I
None )
([2spkrs
I
1spkr )
-N·na
By default. the AVR-2309CI's "Amp Assign" setting is set to "ZONE2".
To use as the surround back speaker for the MAIN ZONE, change the
"Amp Assign" setting ((Fpage 35).
Large :Select this when using large speakers with ample low
frequency reproduction capabilities
Small
:Select this when using small speakers without ample low
frequency reproduction capabilities.
None
:Select this when no speaker is connected.
Yes : Select this when a subwoofer is connected.
No
:Select this when no subwoofer is connected.
2spkrs 1spkr
Select the number of surround back speakers.
#
- Select "Large" or "Small" not according to the physical size of the
speaker but according to the low frequency reproduction capabilities
based on the frequency set at "Crossover Frequency" ((Fpage
31)
- When "Front Speaker" is set to "Small", "Subwoofer" can
automatically set to "Yes".
-If "Subwoofer" is set to "No", "Front Speaker" is automatically set
to "Large".
-If "Surround Speaker" is set to "None", "Surround Back Speaker"
are automatically set to "None".
- When "Front Speaker" is set to "Small", "Center Speaker" can not
be set to "Large".
- When using just one surround back speaker, connect it to the left
channel (SBl).
Subwoofer Setup
low range signal to be reproduced by subwoofer.
[Selectable items]
LFE
I:
Play low range and LFE signal of channels set to
"Small".
LFE+Main : Play low range and LFE signal of all channels
#
- This can be set when menu "Speaker Configuration" - "Subwoofer"
is set to "Yes".
- Play music or a movie source and select the mode offering the
strongest bass.
- Select "LFE+Main" if you want the bass signals to always be
produced from the subwoofer.
IJOistance
Set distance from listening position to speakers.
Before making the settings, measure the distance from the
listening position to the different speakers.
Feet I Meters
Select unit for distance.
Step
Select step. (smallest distance)
[Selectable items]
[J!!:J
O,1ft .
Can be selected when "Feet" is set.
~
0.01m :
Can be selected when "Meters" is set.
Default
Resets the settings to the default values.
Distance measurement
Select the speaker you want to set. then set the distance.
Set the value closest to the measured distance.
[Variable range]
O.Oft - 6O.Oft :
Display when "Feet" is set.
O.OOm -18.00m :
Display when "Meters" is set.
-U'Ua
Set the distance between the listening position and the various
speakers to no more than 20.0 ft (6.00 meters).
I
'J
For details on how to select, set and cancel settings for each menu, see "Menu Operations" (Gf'page
221.1 30