Denon AVR-2309CI Owner's Manual page 86

ENGLISH
I
[Remote Control Unit]
Symptom Cause Countermeasure Page
Set does not work • Batteries are worn. • Replace with new batteries. 3
properly when
• You are operating outside of the • Operate within the specified
3
remote control specified range. range.
unit operated. • Obstacle between main unit and • Remove the obstacle. 3
remote control unit
• The batteries are not inserted in • Insert the batteries in the 3
the proper direction, as indicated proper direction, following the
by the polarity marks in the
polarity marks in the battery
battery compartment compartment
• The set's remote control sensor • Move the set to a place in which 3
is exposed to strong light (direct the remote control sensor will
sunlight, invertertype fluorescent
not be exposed to strong light
bulb light, etc.)
• The remote 10 of the main unit • Set "Remote 10" for the main 37
and remote control unit do not unit to "1':
match.
[Audio]
Symptom Cause Countermeasure Page
No sound is
• You are playing a monaural • The mode is set to something 45
produced from source lTV, AM radio broadcast, other than "STANDARD" (Dolby/
center speaker. etc) in the "STANDARD" (Dolby/ DTS Surround).
DTS Surround) mode.
No sound • The surround mode is set to • Set to a surround playback 45,46
is produced "STEREO", "DIRECT" or "PURE mode.
from surround DIRECT".
speakers.
No sound is
• The surround back speaker's • Check the setting and change it 35
produced from power amplifier is assigned to a as necessary.
surround back different channel.
speaker.
• Surround back speaker setting is • Set to something other than 30
set to "None". "None".
• The " Parameter" - "Surround • Please set "Parameter" - 48,49
Parameter" - "SB CH Out" "Surround Parameter"
- "SB
settings are "OFF". CH Out" to settings other than
"OFF".
• Surround mode not set to a mode • Select a surround playback 44 - 46
for 6.1- or 7.1-channel playback. mode.
83
Symptom Cause Countermeasure Page
No sound is • Subwoofer's power not turned • Turn on the subwoofer's power. -
produced from on.
subwoofer.
• The
" Subwoofer" setting at • Set to "Yes': 29
"Speaker Configuration" is set to
"No':
• The subwoofer is not properly • Check the connections. 10
connected.
• The subwoofer's volume is • Adjust the subwoofer's volume 63
turned off. to an appropriate level.
No test tones are • Surround mode not set to • Set to the "STANDARD" (Dolby/
45
produced when "STANDARO" (Dolby/DTS DTS Surround) mode.
main remote Surround).
control unit's
TEST
button is
pressed.
OTS sound is not • Blu-ray Disc player / DVD player's • Set the Blu-ray Disc player / OVO -
output. audio output setting is not set to player. For details, refer to the
bitstream. Blu-ray Disc player / DVD player's
operating instructions.
• Blu-ray Disc player / DVD player is • Use a DTS-compatible player.
-
not compatible with DTS sound
playback.
• The
AVR-2309CI's
"Decode • Set to the "Auto" or "DTS" 41
Mode" setting is set to "PCM ': mode.
HDMI audio
• The "Manual Setup" - "HOMI • Set to "AMP':
32
signals are not Setup"
-
"HDMI Audio Out"
output from setting is set to "TV':
speakers.
No sound is • The "Manual Setup" - "HDMI • Set to "TV': 32
output from Setup" - "HDMI Audio Out"
the monitor setting is set to "AMP':
connected
with HDMI
connections.
Dolby TrueHD,
• HDMI is not connected. • Connect the HDMI.
12,13
DTS-HD, Dolby
Digital Plus audio
is not output.