Reboot Url; Performance Reporting Features; Call Statistics And Reporting - Linksys SPA941 Administration Manual

Note: The SPA will resync only when it is idle.
The syntax of Resync URL is:
http://<spa-ip-addr>/resync?[[protocol://][server-name[:port]]/profile-pathname]
•
If no parameter follows "/resync?", the profile rule setting in provisioning is used.
•
If no protocol is specified, TFTP protocol is assumed. Note: Only TFTP is supported in the current
release.
•
If no server-name is specified, the host that requests the URL is used as server-name.
•
If no port specified, default port of the protocol is used – 69 for TFTP.
•
The profile-path is the path to the new profile to resync with.
For example: http://192.168.2.217/upgrade?tftp://192.168.2.251/spaconf.scf

Reboot URL

Through the Reboot URL, the user can reboot the SPA.
Note: Upon request, the SPA will reboot only when it is idle.
The Reboot URL is: http://<spa-ip-addr>/admin/reboot

• Performance Reporting Features

Call Statistics and Reporting

The following lists the statistics collected by the SPA during normal operation. These statistics are
presented in the SPA web-page (under the "Info" tab). Line status is reported for each line (1 and 2).
Each line maintains up to 2 calls: Call 1 and 2.
System Status
Current Time
Elapsed Time
Broadcast Pkts Sent
Broadcast Pkts Recv
Broadcast Bytes Sent
Broadcast Bytes Recv
Broadcast Packets Dropped
Broadcast Bytes Dropped
RTP Packets Sent
RTP Packets Received
RTP Bytes Sent
RTP Bytes Received
© 2003 - 2005 Linksys, a Division of Cisco Systems
Current time and date. E.g., 10/3/2003 16:43:00
Total time elapsed since last reboot. E.g., 25 days and 18:12:36
Total number of broadcast packets sent
Total number of broadcast packets received
Total number of broadcast bytes sent
Total number of broadcast bytes received and processed
Total number of broadcast packets received but not processed
Total number of broadcast bytes received but not processed
Total number of RTP packets sent (including redundant packets)
Total number of RTP packets received (including redundant packets)
Total number of RTP bytes sent
Total number of RTP bytes received
Proprietary (See Copyright Notice on Page 2)
DRAFT
87