Linksys SPA941 Administration Manual page 68

appearance is not shared. Leaving this entry blank indicates the
default value of "c=r;p=s"
Disabled LED pattern when the Call Appearance is disabled (not available
for any incoming or outgoing call). Leaving this entry blank
indicates the default value of "c=o"
Register Failed LED pattern when the corresponding extension has failed to
register with the proxy server. Leaving this entry blank indicates
the default value of "c=a"
Registering LED Pattern when the corresponding extension is trying to
register with the proxy server. Leaving this entry blank indicates
the default value of "c=r;p=s"
Call Back Active Call Back operation is currently active on this call appearance
Supplementary Services
Enable or disable the corresponding supplementary services on the phone.
Parameter Name Description
Conference Enable/disable Three way conference service
Attn Transfer Enable/disable attended-call-transfer service
Blind Transfer Enable/disable blind-call-transfer service
Do Not Disturb Enable/disable do-not-disturb service
Block Anonymous Enable/disable block-anonymous-call service
Call
Call Back Enable/disable call-back (a.k.a. repeating dialing) service
Block Caller ID Enable/disable blocking outbound Caller-ID service
Secure Call Enable/disable secure-call service
CFWD All Enable/disable call-forward-all service
CFWD On Busy Enable/disable call-forward-on-busy service
CFWD On No Enable/disable call-forward-on-no-answer service
Answer
Ring Tone
Each entry defines a ring tone to be used on the phone, with an ID between 1 and 10. The ID can be
used in a DirEntry to indicate which ring tone to use when the corresponding caller calls.
Parameter Name Description
Ring 1 Ring tone script for Ring 1
Ring 2 Ring tone script for Ring 2
Ring 3 Ring tone script for Ring 3
Ring 4 Ring tone script for Ring 4
Ring 5 Ring tone script for Ring 5
Ring 6 Ring tone script for Ring 6
Ring 7 Ring tone script for Ring 7
Ring 8 Ring tone script for Ring 8
Ring 9 Ring tone script for Ring 9
Ring 10 Ring tone script for Ring 10
© 2003 - 2005 Linksys, a Division of Cisco Systems
Type Default
RingScript n=Classic-1;w=3;c=1
RingScript n=Classic-2;w=3;c=2
RingScript n=Classic-3;w=3;c=3
RingScript n=Classic-4;w=3;c=4
RingScript n=Simple-1;w=2;c=1
RingScript n=Simple-2;w=2;c=2
RingScript n=Simple-3;w=2;c=3
RingScript n=Simple-4;w=2;c=4
RingScript n=Simple-5;w=2;c=5
RingScript n=THx;w=4;c=7
Proprietary (See Copyright Notice on Page 2)
DRAFT
LedScript
LedScript
LedScript
LedScript
Type Default
Bool Yes
Bool Yes
Bool Yes
Bool Yes
Bool Yes
Bool Yes
Bool Yes
Bool Yes
Bool Yes
Bool Yes
Bool Yes
68