Linksys SPA941 Administration Manual page 34

•
Cancel Call Forward All (*73) – Cancel call forward all. Applicable to primary extension only
•
Call Forward Busy (*90) – Call forward on busy. Applicable to primary extension only
•
Cancel Call Forward Busy (*91) – Cancel call forward on busy. Applicable to primary extension
only
•
Call Forward No Answer (*92) – Call forward if no answer. Applicable to primary extension only
•
Cancel Call Forward No Answer (*93) – Cancel call forward no answer. Applicable to primary
extension only
•
Block Caller ID Always (*67) – Block caller ID on all outbound calls. Apply to all extensions
•
Block Caller ID Per Call (*81) – Block caller ID on the next outbound call (on the current call
appearance only).
•
Unblock Caller ID Always (*68) – Unblock caller ID on all outbound calls. Apply to all extensions
•
Unblock Caller ID Per Call (*82) – Unblock caller ID on the next outbound call (on the current call
appearance only).
•
Secure All Calls (*16) – Default to prefer to use encrypted media for all outbound calls. Apply to
all extensions.
•
Secure No Calls (*17) – Default to prefer to use unencrypted media for all outbound calls. Apply
to all extensions.
•
Secure Next Call (*18) – Prefer to use encrypted media for the next outbound call (on this call
appearance only)
•
Do Not Secure Next Call (*19) – Prefer to use unencrypted media for the next outbound call (on
this call appearance only).
•
Do Not Disturb (*78) – Apply to all extensions
•
Cancel Do Not Disturb (*79) – Apply to all extensions
•
Block Anonymous Calls – Apply to all extensions
•
Cancel Block Anonymous Calls – Apply to all extensions
•
Blind Transfer (*98)
•
Prefer G711u (*017110) – Set preferred codec to G711u for next outbound call
•
Prefer G711a (*017111) – Set preferred codec to G711a for next outbound call
•
Prefer G723 (*01723) – Set preferred codec to G723 for next outbound call
•
Prefer G726r16 (*0172616) – Set preferred codec to G726r16 for next outbound call
•
Prefer G726r24 (*0172624 – Set preferred codec to G726r24 for next outbound call
•
Prefer G726r32 (*0172632) – Set preferred codec to G726r32 for next outbound call
•
Prefer G726r40 (*0172640) – Set preferred codec to G726r40 for next outbound call
•
Prefer G729a (*01729) – Set preferred codec to G729a for next outbound call
•
Force G711u (*027110) – Force to use G711u for next outbound call
•
Force G711a (*027111) – Force to use G711a for next outbound call
•
Force G723 (*02723) – Force to use G723 for next outbound call
© 2003 - 2005 Linksys, a Division of Cisco Systems Proprietary (See Copyright Notice on Page 2)
DRAFT
34