Linksys SPA941 Administration Manual page 47

Total Ring Length = 60s
ToneScript – A mini-script that specifies the frequency, level and cadence parameters of a call progress
tone. May contain up to 127 characters. Syntax: FreqScript;Z
section in a CadScript except that each on/off segment is followed by a frequency components
parameter: Z = D (on /off
i i i,1
where fi,j = n [+n ]+n [+n
1 2 3
in the FreqScript shall be used in that segment; if more than one frequency component is used in a
segment, the components are summed together.
Example 1: Dial Tone
350@-19,440@-19;10(*/0/1+2)
Number of Frequencies = 2
Frequency 1 = 350 Hz at –19 dBm
Frequency 2 = 440 Hz at –19 dBm
Number of Cadence Sections = 1
Cadence Section 1: Section Length = 10 s
Number of Segments = 1
Segment 1: On=forever, with Frequencies 1 and 2
Total Tone Length = 10s
Example 2: Stutter Tone
350@-19,440@-19;2(.1/.1/1+2);10(*/0/1+2)
Number of Frequencies = 2
Frequency 1 = 350 Hz at –19 dBm
Frequency 2 = 440 Hz at –19 dBm
Number of Cadence Sections = 2
Cadence Section 1: Section Length = 2s
Number of Segments = 1
Segment 1: On=0.1s, Off=0.1s with Frequencies 1 and 2
Cadence Section 2: Section Length = 10s
Number of Segments = 1
Segment 1: On=forever, with Frequencies 1 and 2
Total Tone Length = 12s
© 2003 - 2005 Linksys, a Division of Cisco Systems
/f [,on /off /f [,on
i,1 i,1 i,2 i,2 i,2 i,3
[+n [+n ]]]]] and 1 < n < 6 indicates which of the frequency components given
4 5 6 k
[;Z ]. The section Zi is similar to the S
1 2
/off /f [,on /off /f [,on
i,3 i,3 i,4 i,4 i,4
Proprietary (See Copyright Notice on Page 2)
DRAFT
/off /f [,on /off /f ]]]]]),
i,5 i,5 i,5 i,6 i,6 i,6
i
47