Removal And Installation Of The Sealant Canister - Chevrolet 2009 TrailBlazer Owner's Manual

12. Unplug the power plug (H) from the accessory
power outlet in the vehicle.
13. Disconnect the air only hose (G) from the tire valve
stem, by turning it counterclockwise, and replace
the tire valve stem cap.
14. Replace the air only hose (G) and the power
plug (H) and cord back in its original location.
15. Place the equipment in the original storage location
in the vehicle.
The tire sealant and
compressor kit has an
accessory adapter located
in a compartment on the
bottom of its housing that
may be used to inflate air
mattresses, balls, etc.
Removal and Installation of the Sealant
Canister
To remove the sealant canister:
1. Unwrap the sealant hose.
Without Pressure
Deflation Button
2. Press the canister release button.
3. Pull up and remove the canister.
4. Replace with a new canister which is available from
your dealer/retailer.
5. Push the new canister into place.
With Pressure Deflation
Button
5-91