Removal And Installation Of The Sealant Canister - Chevrolet 2008 Owner's Manual

9. Turn off the air compressor by moving the switch to
the O (off) position.
CAUTION:
{
Storing the tire sealant and compressor kit
or other equipment in the passenger
compartment of the vehicle could cause injury.
In a sudden stop or collision, loose equipment
could strike someone. Store the tire sealant
and compressor kit in the proper place.
10. Disconnect the compressor inflator hose and wrap
the hose in the bottom of the sealant and
compressor kit.
11. Place the equipment in its original location.
5-84
Removal and Installation of the
Sealant Canister
To remove the sealant canister, do the following:
1. Unlock the air compressor inflator hose from the
sealant canister by pulling the lever up.
2. Disconnect the air compressor inflator hose from
the sealant canister.
3. Unwrap the sealant filling hose from the
compressor.