Audio Output - Chevrolet 2009 TrailBlazer Owner's Manual

How to Change the Video Format when in
the Auxiliary Mode
The auxiliary input video format is preset to NTSC.
In some countries, the video format may be in the
PAL system. To change the video format:
z
1. Press the display menu button.
q
2. Press the down
Video Format option.
r
3. Press the button to select Video Format.
p
4. Press the left or right
select the desired video format.
r
5. Press the button to accept the change.

Audio Output

Audio from the DVD player or auxiliary inputs can be
heard through the following possible sources:
•
Wireless Headphones
•
Vehicle Speakers
•
Vehicle wired headphone jacks on the Rear Seat
Audio system (if equipped)
3-98
navigation arrow to highlight the
o
navigation arrows to
The RSE system always transmits the audio signal to
the wireless headphones, if there is audio available.
See "Headphones" earlier in this section for more
information.
The RSE system is capable of outputting audio to the
vehicle speakers by using the radio. The RSE system can
be selected as an audio source on the radio if the RSE
system power is on. Once the RSE system is selected as
an audio source on the radio, adjust the speaker volume
on the radio, if necessary. If the RSE system power is not
on, the RSE system is not an available source on the
radio. See the vehicle's radio information.
The RSE system is capable of outputting audio to the
wired headphone jacks on the rear seat audio system
(if equipped). The RSE system can be selected as
an audio source on the rear seat audio system if the
RSE system power is on. See Rear Seat Audio (RSA)
on page 3-108 for more information.