Removal And Installation Of The Sealant Canister - Chevrolet Equinox Fuel Cell Owner's Manual

Removal and Installation of the Sealant
Canister
To remove the sealant canister, do the following:
1. Unlock the air only hose from the sealant canister
by pulling up on the lever.
2. Pull the air only hose from the sealant canister.
3. Unwrap the sealant/air hose from the compressor.
5-44
4. Turn the sealant canister so the inflator filling hose
is aligned with the slot in the compressor.
5. Lift the sealant canister from the compressor.
6. Replace with a new sealant canister. See your
Driver Relationship Manger (DRM) for the new
canister.