Installation; Rear Panel Connectors - Extron electronics XTP T USW 103 User Manual

Installation

This section contains information for connecting and wiring the XTP T USW 103. Topics in
this section include:
•
•
The XTP T USW 103 can be mounted in a rack, under a desk, or on a tabletop (see
Mounting

Rear Panel Connectors

Figure 2.
a
3.5 mm Stereo Plug Connector
3.5 mm Stereo Plug Connector
b
Rear Panel Connectors
Making Connections
on page 27 for more mounting details).
Audio Plugs.eps
POWER
1
12V
AUDIO
1.0 A MAX
Tip (+)
RGB
INPUTS
i a b
Sleeve ( )
XTP T USW 103 Rear Panel Connectors
RCA Connector
Audio connector — Connect an analog audio source to the 3.5 mm TRS jack. All
three video inputs can share this audio input.
Tip (+)
Ring (-)
Sleeve ( )
Figure 3. Wiring for TRS Audio
(balanced)
By default, audio input is selected automatically (see
commands on page 15 to manually select audio inputs). When input 2 or 3 is selected
with automatic audio input selections, the switcher prioritizes embedded digital audio.
The following table shows the audio format that is sent over the XTP connection when a
Tip (L)
specific audio format is not specified.
Ring (R)
Selected HDMI Embedded
Video Input Audio Present
VGA
Sleeve ( )
VGA
(unbalanced)
HDMI
HDMI
HDMI
HDMI
Analog video connector — Connect a video source to the female 15-pin HD
connector, labeled input 1. It accepts RGBHV video signals.
SIG LINK
2
3
HDMI HDMI
XTP OUT
c d e
Analog Audio
Present
N/A Yes
N/A No
Yes No
Yes Yes
No Yes
No No
OVER XTP REMOTE
RS-232 IR CONTACT RS-232
LAN
Tx Rx G Tx Rx 1 2 3 G Tx Tx
f g h
Audio input selection SIS
Audio Sent Over XTP
Analog audio
No audio
HDMI embedded audio
HDMI embedded audio
Analog audio
No audio
XTP T USW 103 • Installation
R
G
3