Front Wheel Axle-Tree - Invacare Delta II Service Manual

Service-Anleitung
6.3

Front Wheel Axle-tree

WARNING:
Prepare the vehicle by putting it on its side onto a support (not too soft)
so that no stress applies to the front wheel and it can be easily
accessed from both sides or jack up vehicle securely.
Removing the Front Wheel Axle-tree
1. Take off front wheel.
2. Take off the hub cabs from the removed front wheel.
3. Remove the axle locking rings.
4. Carefully take out the axle using a rubber mallet.
Disassembling the Wheel Bearings
1. Pull off wheel bearing with a puller.
Assembling the Wheel Bearings
1. Drive in wheel bearing with a metal tube (D =
diameter of the outer ring/wheel bearing) or press in
using a press.
Assembling the Front Wheel Axle-tree
1. Re-insert the axle using the rubber mallet.
2. Secure axle with new locking rings.
®
Invacare Delta II
29