Tiller Shaft Shroud, Tiller Shaft - Invacare Delta II Service Manual

Service-Anleitung
4. Console
a) Disassemble tiller and keypad (see above)
b) Remove cable ties.
c) Remove screws connecting the console to the
tiller shaft (see figure)
d) Pull console from the tiller shaft, carefully lift
out connector strips.
Assembling the Tiller, Console & Keypad
1. Ensure that you do not pinch or damage the cable
harness when guiding the screw through the tiller
shaft.
6.9

Tiller Shaft Shroud, Tiller Shaft

Disassembling the Tiller Shaft Shroud and the Tiller Shaft
1. Turn and pull the shock absorber holder off the tiller
shaft.
2. Pull off top and bottom shock absorber.
3. Tilt the tiller shaft backwards and remove the 4
friction swivel joint torx screws with tool T 30.
4. Remove the shroud from the tiller shaft, if necessary
use a rubber mallet.
5. Remove the inner lock ring with round nose pliers.
6. Take out ball bearing with puller.
7. Unscrew friction swivel joint.
®
Invacare Delta II
39