Replacing Front Shroud; Wheels; Replacing Front Wheel/Axle (3-Wheel Version); Replacing Wheels - Invacare Colibri Service Manual

Hide thumbs Also See for Colibri:
Table of Contents

Advertisement

Invacare® Colibri
3.
Place hands on left and right side of shroud.
4. Twist and lift to remove shroud completely.

4.7.2 Replacing front shroud

10 mm socket wrench
Phillips screwdriver
1. Remove shroud. See 4.7.1 Removing shroud, page 15.
2.
Remove four caps A.
3. Loosen and remove screws B.
4. Take off front shroud.
5. Install parts in reverse order.

4.8 Wheels

4.8.1 Replacing Front Wheel/Axle (3–Wheel
Version)
CAUTION!
Risk of Accidents
Accidents may result from standing the chassis
upright on its end.
– Secure the chassis against falling over.
Risk of Damage to Mobility Device
The plastic shroud can be damaged if you
attempt to lift mobility device by its shroud.
– Lift mobility device by the chassis only.
When removing, take care of small parts such as
screws and washers. Put all small parts down so
that they can be installed in correct sequence.
12 mm wrench
13 mm wrench
1. Remove seat.
2. Remove battery boxes.
3. Remove drive unit.
16
4.
Place chassis (1) upright on its seat adapter (2).
5. Secure chassis against falling over.
Removing Wheel
1.
Loosen self-locking nut (1). Secure axle bolt (2) against
slippage.
2. Remove axle slowly.
3. Remove wheel along with distance bushings and
washer.
Installing Wheel
1. Install parts in reverse order. Pay attention to correct
positions of bushings and washer.
2. Install and tighten new self-locking nut.
3. Test all functions.
4.8.2 Replacing Wheels (4–Wheel Version /
Rear Wheels of 3–Wheel Version)
CAUTION!
Risk of injury caused by uncontrolled
movement of mobility device
– Turn off power.
– Engage motors.
– Secure mobility device against rolling away by
placing wedges under wheels.
– Place rear frame of mobility device on a
supporting wooden block before removing
wheels.
When removing, take care of small parts such as
screws and washers. Put all small parts down so
that they can be installed in correct sequence.
Fig. 4-18
Fig. 4-19
1577883-B

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents