Drive; Disassembling The Drive Unit; Disassembling The Components - Invacare Delta II Service Manual

Service-Anleitung
6.7

Drive

WARNING:
Jack up vehicle securely. In order to be able to remove the drive you
must have a ground clearance of at least 150 mm. Be aware of the drive
unit weight, otherwise personal injury may occur. Once servicing has
been completed, carry out a function test and test drive the vehicle.
Danger of Accident!
6.7.1

Disassembling the Drive Unit

1. Remove rear shroud.
2. Disconnect drive connectors.
3. Unlock drive unit (if necessary ask for assistance)
and lower.
4. Press the lower mounting plate bolts down through
the frame.
6.7.2

Disassembling the Components

1. Fender
a) Remove two Allen screws each on the right
and on the left hand side.
2. Drive
a) Remove the driving wheels (see section 7.2.1)
b) Remove three Allen screws each on the right
and left securing the mounting plates.
3. Handle for brake
a) Remove two Allen screws.
®
Invacare Delta II
37