Table of Contents
Advertisement
3 Connecting the speaker
o
ACTIVE SUBWOOFER
FRONT (R)
[;3 -
, ,-
.t!IIJ> ,.,
v·
I , , '
~ ' l i
.'==--
(!:J •
If you want to use two active subwoofer speakers, connect both subwoofer speakers into the SUBWOOFER OUT terminals in the
rear panel.
• When using Dolby Pro Logic liz, connect the Surround Back Speakers (FHL, FHR) to SURROUND BACK/FRONT HEIGHT Jack.
Connecting Speaker Wire
1. Loosen the knob by turning counterclockwise.
2.
Insert the bare part of the wire into the hole in the side of each terminal.
3. lighten the knob by turning clockwise to secure the wire.
CONNECTING THE Bi-AMP SPEAKER
Connect the tweeter (high range) port and woofer (low range) to the front port and surround back speaker port respectively as
appropriate. Then, you can use the bi-amplification feature that supports enriched high range and base tones.
1. Connect the FRONT L connector (rear side of main unit) to the Tweeter port in the front left speaker.
2. Connect the FRONT R connector (rear side of main unit) to the Tweeter port in the front right speaker.
3. Connect the SURROUND BACK L connector (rear side of main unit) to the Woofer port in the front left speaker.
4. Connect the SURROUND BACK R connector (rear side of main unit) to the Woofer port in the front right speaker.
Bi-AMP Speaker R
Bi-AMP Speaker L
Woofer
Tweeter
Woofer
e-
English
Advertisement
Table of Contents
