Samsung HW-C900 User Manual page 46

Av receiver system
Hide thumbs Also See for HW-C900:
Table of Contents

Advertisement

Seillp
_
SEITING DOLBY PRO LOGIC MODE
This mode provides up to 7.1 channel sound from 2 channel sources, or provides 7.1 channel sound from 5.1 channel
sources for music or movie mode.
Press the PROLOGIC button on the remote control.
• MOVIE: Adds realism to the movie soundtrack.
• MUSIC: Provides up to 7.1 channel surround sound for digital, analog or existing stereo sources.
• GAME : Enhances the excitement of the game's sound.
• MATRIX: You will hear up to 7.1 channel surround sound.
• PL (Pro Logic) : You will experience a surround effect with 5.1 channel surround sound.
• OFF: Output the original signal as it is without applying the sound field effect or any other sound effect.
SEITING DOLBY PRO LOGIC IIx
- - - - - - - - - - - - - - - -
rh! "rrr;
C
i'lf
,
C.
rr.
SE TUP
4. Press the ...
~
buttons to select the option you want, and then press the
ENTER or
~
button.
• PANORAMA: You can set it ON or OFF.
(This mode extends the front stereo image to include the surround
speakers for an exciting "wraparound" effect with side wall imaging.)
• DIMENSION: You can set from -7 to +7.
(Incrementally adjusts the sound field (DSP)from the front or surround.)
• C- WIDTH: You can set from 0 to 7.
(This sets the width of the center sound image. The higher the setting, the less sound comes from the center
speaker.)
This function works only in Dolby Pro Logic IIx MUSIC mode.
1. Press the SETUP/MENU button on the remote control.
• Each time the button is pressed, the mode switches between SETUP
ENTER and SETUP OFF.
2. Press the ENTER button to select SETUP ENTER.
3. Press the ...
~
buttons to select DPLlIX SETUP, and then press the
ENTER or
~
button.
fEJ ·
PANORAMA, DIMENSION and CENTER WIDTH settings are enabled only if the Dolby Pro Logic Mode is set
to MUSIC.
• You cannot use Dolby Pro Logic IIx mode for multi channel signals such as Dolby Digital, Dolly Digital
+,
Dolby true HD, DTS, DTS-HD Master Audio.
• Pro Logic works only for PCM audio signals with sampling frequencies of 32KHz, 44KHz or 48KHz.
• When Dolby Pro Logic liz is set ON, Dolby Pro Logic IIx can not be used.
46

Advertisement

Table of Contents
loading

Table of Contents