Table of Contents
Advertisement
SetlJp
_
ASC (AUTO SOUND CALIBRATION) SETUP
By
setting the ftSC
function
just once when you relocate or install the unit, you can have the unit automatically
recognize the distance between speakers, levels between channels, and frequency characteristics to create a 7.1-
channel sound field optimized for your environment.
- Before Setting -
1. Plug the ASC microphone into
the
ASC MIC jack.
2. Place the ftSC microphone at the listening position.
3. Press the ASC button on the front panel, and then press the
ENTER
button.
1. Press the
SETUPIMENU
button on
the
remote control.
• Each time the button is pressed, the mode switches between
SETUP
ENTER
and
SETUP
OFF.
2. Press the
ENTER
button to select
SETUP ENTER.
3. Press the •
~
buttons to select ASC
SETUP,
and then press the
ENTER
or
~
button.
SETUP
E "·ITEn
/II.
n.
'=:T
~!J:::'T
_ ' !
I
!II~
.
SFTUP
AS:::::
'-1'-'-
n,:'li_
4. Press the •
~
buttons to select ASC START, and then press the
ENTER
button.
• To create the optimal 7.1 channel sound field, the selections are in the
following sequence:
L-C- R-SR-SBR-SBL-SL-SW
• EQ ON :
The
ASC(Auto Sound Calibration) EO mode is set to on.
EQ OFF: The ASC(Auto Sound Calibration) EO mode is set to off.
5. If you see a ASC
READY
message on the screen, press the
ENTER
button to apply the measurement value.
And then unplug the ftSC microphone.
To cancel the ASC (Auto
Sound
Calibration)
setup.
This will be automatically reverted if you press
the
RETERN
button.
• If ASC error occurs, see
"ftSC
Error Ust" on page 66.
fEJ •
setting the N>C function takes about 3 minutes.
• Because the volume level of the tone is fixed during the N>C setup, you cannot adjust the volume using the volume control.
• If the
N>C
microphone is disconnected during the N>C setup, the setup will be canceled.
• You can also
press
the ASC button on the remote control to use this
function.
• If Dolby Pro Logic liz, Zone 2, Bi-Arnp is
set to
ON, the selection are in the following sequence: FL -7 CEN -7 FA -7 SR -7
SL -7 SW.
50
Advertisement
Table of Contents
