Table of Contents
Advertisement
S e t l l P - - - - - - - -
CONNECTION SETTING FOR SURROUND BACK
SETUP
Settings for the surround back speaker differ depending on the connection method and installation site of the
speaker to be connected. You must configure the SB SETUP settings according to the connected speaker before
you listen to music properly.
1. Press the SETUP/MENU button on the remote control.
• Each time the button is pressed, the mode switches between SETUP
ENTER and SETUP OFF.
2. Press the ENTER button to select SETUP ENTER.
3. Press the
£
T
buttons to select SB SETUP, and then press the ENTER
or
~
button.
CI Inn,'
n
1-'1-1,'
_I '-'
I"i.
I , -
D
1-1
1 _
iI.
CO
_ILl
5E:
4. Press the
£ T to select a proper setting for the surround back speaker.
• SURR-BACK : Select this if you want to install the surround back
speaker in the default settings. With this setting, you can enable the
Dolby Pro Logic lix mode.
• PUlz : Select this if you want to install the surround back speaker in the
top front comer. With this setting, you can enable the Dolby Pro Logic liz
mode.
• ZONE2 : Select this if you want to connect the ZONE2-specific speakers (letVright) to the surround back port.
With this setting, you can enable the Powered ZONE2 feature.
• Bi-AMP : Select this if you want to connect the Bi-Amp compliant speaker to the surround back port. With
this setting, you can enable the Bi-Amp feature.
~
• Depending on the SB SETUP settings, the surround back speaker or front height speaker menus may not
be activated or may differ in the speaker menu: SPEAKER SIZE, SPEAKER LEVEL, SPEAKER DISTANCE,
• Depending on your setting, you may not use different features simultaneously. If you set SURR-BACK, for
instance, you cannot use the following features: PUlz, ZONE2 and Bi-AMP.
42
Advertisement
Table of Contents
