Table of Contents
Advertisement
Setup
_
ZONE2 SETUP
You can use the remote control or the master volume of the main unit to adjust the volume of ZONE2.
1. Press the SETUP/MENU button on the remote control.
• Each time the button is pressed, the mode switches between SETUP
ENTER and SETUP OFF.
2.
Press the ENTER button to select SETUP ENTER.
3. Press the" • buttons to select ZONE2 SETUP, and then press the
ENTER or
~
button.
4. Press the" • buttons to select VARIABLE or FIXED.
• VARIABLE: You can control the ZONE2 volume directly in the main unit.
• FIXED: Select this if you can control the ZONE2 volume directly in the
external amplifier.
CC-,
I
rrr
i
Eh,l
'TCCr'
_' L.
,_,
I If
L 1 .
7'-'
h.1
!= ;.
C;C
Tf fP
L.urlfl-
'
_
_ 1_ . _.
1"1-11
JI' UL
~
• However, you can still use the MUTE button on the remote control regardless of the ZONE2 SETUP
settings.
• If SB is set to ZONE2, "ZONE2 SETUP" will be changed to "VOL VARIABLE" accordingly.
12-V TRIGGER
Two different 12 Volt trigger outputs allow automatic activation of externally controlled devices.
Each port supports 12V/30mA trigger-activated functions (BD/DVD, SA 1)
1. Press the SETUP/MENU button on the remote control.
• Each time the button is pressed, the mode switches between SETUP
ENTER and SETUP OFF.
2. Press the ENTER button to select SETUP ENTER.
3. Press the" • buttons to select 12-V TRIGGER, and then press the
ENTER or
~
button.
4. Press the ... buttons to select T1 or T2, and then press the ENTER or
~
button.
5. Press the ... buttons to set the external device mode you want.
• BD/DVD : When switching to BD/DVD mode, 12V signal will be output to
the TRIGGER OUT terminal.
• SAT: When switching to SAT mode, 12V signal will be output to the
TRIGGER OUT terminal.
• OFF: 12-V TRIGGER will be disabled.
54
l-rT
l l n
'::'C
ur"
rh 1 -, r f j
Cr'lI
err.
T
Cr'
1-':
I- j
C Crl
I.
u
I_LI.
SRTI
Advertisement
Table of Contents
