Cadillac CTS 2013 Owner's Manual page 367

Table of Contents

Advertisement

4. Route the loop end of the
strap (3) through one of the
cargo tie-downs (1) in the rear of
the vehicle.
5. Route the hook (2) through the
loop (3).
6. Pull the strap to tighten it around
the cargo tie-down (1).
7. Route the hook end of the strap
through the wheel.
8. Attach the hook to the cargo
tie-down in the rear of the
vehicle.
9. Slide the buckle to tighten the
cargo tie-down strap.
Storing the Flat Tyre with a
Flat Load Floor (Wagon)
1. Hook
2. Tailgate Striker
3. Wheel Spoke
4. Wheel Spoke
5. D-rings
Vehicle Care
1. Return all tools as they were
stored in the rear storage
compartment and put the
compartment cover on.
2. Put the flat tyre in the tyre
storage bag, if there is one.
3. Place the tyre, lying flat, in the
rear storage compartment.
4. Route one of the hooks (1), at
the end of the cable provided,
through the tailgate striker (2).
5. Slide both D-rings (5) on each
side of the vehicle as far
rearward as they will go.
6. Route one hook (1) under the
wheel spoke (3) and place the
hook into the slot in the cargo
rail on the driver side of the
vehicle.
7. Slide the D-ring (5) on that side
forward to engage the hook.
10-91

Advertisement

Table of Contents
loading

Table of Contents