Am-Fm Radio - Cadillac CTS 2013 Owner's Manual

7-6 Infotainment System
Radio

AM-FM Radio

Control Buttons
The knobs and buttons used to
control the radio are:
FM/AM: Press to choose between
FM and AM.
TUNE/TONE: Turn to search for
stations.Press to enter the
Tone menu.
MENU/SELECT: Turn clockwise or
anticlockwise to scroll through the
station list. Press the MENU/
SELECT knob to select the desired
station.
INFO: Press to display additional
information that may be available for
the current song. When information
is not available, No Information
displays.
SEEK or SEEK: Press to go to
the previous or to the next radio
station and stay there.
The radio only tunes to stations with
a strong signal that are in the
selected band.
FAV: Press to change the
favourites page.
Softkeys: Press to select preset
stations.
Radio Data System (RDS)
The audio system has a Radio Data
System (RDS) feature. RDS is
available for use only on FM
stations that broadcast RDS
information. This system relies upon
receiving specific information from
these stations and only works when
the information is available. While
the radio is tuned to an FM-RDS
station, the station name or call
letters display. In rare cases, a radio
station can broadcast incorrect
information that causes the radio
features to work improperly. If this
happens, contact the radio station.
Selecting a Station
Seek Tuning
If the radio station is not known:
Briefly press SEEK or
The radio will search for the next
receivable station. If the radio does
not find a station, it switches
automatically to a more sensitive
search level. If it still does not find a
station, the frequency that was last
active begins to play and None
Found displays.
If the radio station is known:
Press and hold SEEK or
until the desired station on the
pop-up frequency display is almost
reached, then release the button.
Manual Tuning
Turn the TUNE knob to select the
frequency on the pop-up display.
SEEK.
SEEK