Table of Contents
Advertisement
10-88
Vehicle Care
Coin/Pierce Jack and Wrench
Hex Head Jack and Wrench
5. Turn the wheel wrench
anticlockwise to lower the jack
lift head until the jack fits under
the vehicle.
6. Raise the jack by turning the
wheel wrench clockwise until the
slots in the jack head fit into the
metal flange located behind the
V-shaped locating notches on
the plastic moulding as shown.
7. Put the compact spare tyre
near you.
8. Raise the vehicle by turning the
wheel wrench clockwise. Raise
the vehicle far enough off the
ground for the compact spare
tyre to fit under the vehicle.
9. Remove all of the wheel nuts
and the flat tyre.
WARNING
Rust or dirt on a wheel, or on the
parts to which it is fastened, can
make wheel nuts become loose
after time. The wheel could come
off and cause an accident. When
changing a wheel, remove any
rust or dirt from places where the
wheel attaches to the vehicle. In
an emergency, a cloth or a paper
(Continued)
Advertisement
Chapters
Table of Contents
