Cadillac CTS 2013 Owner's Manual page 363

3. Find the jacking location using
the diagram above, and the
corresponding V-shaped locating
notches in the plastic molding.
WARNING
Getting under a vehicle when it is
lifted on a jack is dangerous.
If the vehicle slips off the jack,
you could be badly injured or
killed. Never get under a vehicle
when it is supported only by
a jack.
WARNING
Lifting a vehicle and getting under
it to do maintenance or repairs is
dangerous without the
appropriate safety equipment and
training. If a jack is provided with
the vehicle, it is designed only for
changing a flat tyre. If it is used
for anything else, you or others
could be badly injured or killed if
the vehicle slips off the jack. If a
jack is provided with the vehicle,
only use it for changing a flat tyre.
WARNING
Raising the vehicle with the jack
improperly positioned can
damage the vehicle and even
make the vehicle fall. To help
avoid personal injury and vehicle
damage, be sure to fit the jack lift
head into the proper location
before raising the vehicle.
Vehicle Care
Notice: If you position the jack
under the rocker moulding and
attempt to raise the vehicle, you
could break the moulding and/or
cause other damage to your
vehicle. Always position the jack
so that when the jack head is
raised, it will fit firmly in the notch
located inboard from the rocker
moulding.
4. If you have a coin/pierce jack,
attach the jack handle extension
to the jack by sliding the hook
through the end of the jack and
insert the other end of the jack
handle into the wrench.
If you have a hex head jack,
place the hex tube end of the
wrench over the hex head of
the jack.
10-87