Table of Contents
Advertisement
1. Identify the front and rear
crossrail.
2. The front cross rail (1) is smaller
than the rear cross rail (2).
3. The cross rail supports are
labelled with an arrow (2) that
needs to point toward the front
of the vehicle. A pin (1) will be
visible on the bottom when the
cross rail support lever is down.
To install the cross rail support,
move the lever into the forward
upper position; the pin (1) will
not be visible.
Storage
4. Locate the forward or rearward
cut-out in the side rail channel.
5. Insert both crossrail ends into
the cut-outs, making sure the
arrows are pointed toward the
front of the vehicle.
4-7
Advertisement
Chapters
Table of Contents
