Switching Between The Handset And The Speakerphone; Setting The Handset Volume; Setting The Speakerphone Volume; Using Redial - Radio Shack Caller Owner's Manual

number as you dial). Then (after about 15 seconds)
and the elapsed time for your call appear.
To make a call using the speakerphone, press
. SPEAKER/HEADSET lights. Dial the phone
HEADSET
number (you see the number as you dial). Then (after about
J?C;H J?C;H
J?C;H J?C;H
15 seconds) and the elapsed time of your call appear.
To answer an incoming call, pick up the handset or press
. The elapsed time of the call appears.
SPEAKER/HEADSET
To end a call, place the handset back on the base or press
.
SPEAKER/HEADSET
5 "$
9+6%*+0) '69''0
"5
6*' 2'#-'42*10'
To switch from the handset to the speakerphone during a
call, press
SPEAKER/HEADSET
lights. Then place the handset on the base.±
To switch from the speakerphone to the handset, just lift the
handset and resume your conversation. The speakerphone
and SPEAKER/HEADSET indicator automatically turns off.
5 " "*
'66+0) 6*' #0&5'6
You can change the handset's volume during a call by
sliding
HANDSET VOL. NORM/HI
level.
5 " "5
'66+0) 6*' 2'#-'42*10'
You can adjust the speakerphone's volume during a
speakerphone call by sliding
7 "4
5+0) '&+#.
The redial memory holds up to 32 digits, so it can store
long-distance as well as local numbers.±
To redial the last number you dialed, lift the handset or
press
SPEAKER/HEADSET
:?7B?D=ý° :?7B?D=ý° :?7B?D=ý° :?7B?D=ý°
phone number and
7 "% "9
5+0) #.. #+6
(flash) is the electronic equivalent of pressing
CALL WAIT
the switchhook for special services, such as Call Waiting.±
For example, if you have call waiting, press
answer an incoming call without disconnecting the current
call. Press again to return to the first call.
CALL WAIT
SPEAKER/
" "* "
6*' #0&5'6 #0&
. SPEAKER/HEADSET
"8
1.7/'
to the desired listening
"8
1.7/'
SPEAKER VOL.
then press . The dialed
REDIAL
appear.
CALL WAIT
J?C;H J?C;H J?C;H J?C;H
"
±
"016'"
Switching Between the
Handset and the
Speakerphone
• The speakerphone does not
operate without AC power.
During a power failure, use the
handset instead.
• You cannot use the
speakerphone with a headset
connected to the phone (see
"Using an Optional Headset" on
Page 11).

Using Redial

The redial memory does not store
a flash entry, only the digits you
press after CALL WAIT (see

"Using Call Wait").

Using Call Wait
If you do not have any special
phone services, pressing CALL
WAIT might disconnect the current
call.
to
±
"
9