Operation; Making And Answering Calls; Adjusting The Handset/Headset/Speaker Volume; Switching Between The Handset And The Speakerphone - Radio Shack 2 Line Owner's Manual

Operation

MAKING AND
ANSWERING CALLS
Press the line button to select a line. The
system will automatically use the speaker-
phone. Then dial the number.
The phone has automatic line selection. To
dial your number directly without pressing
the line button, pick up the handset, or press
. To use a specific line,
SPKPHONE/HEADSET
press the button for that line.
When you receive a call, that line's indicator
flashes rapidly until ringing is stopped. To
answer the call, press the corresponding line
button ( or ), lift the handset, or
LINE 1 LINE 2
press
SPKPHONE/HEADSET
To end a call, hang up the handset or press
.
SPKPHONE/HEADSET
Note: The speakerphone only operates with
AC power.
ADJUSTING THE HANDSET/
HEADSET/SPEAKER
VOLUME
To adjust the handset/headset volume, set
to or
HANDSET VOL HI LO
To adjust the speakerphone volume, listen to
the dial tone while the speakerphone is in
use. Then press
VOLUME
to set the desired volume.
SWITCHING BETWEEN THE
HANDSET AND THE
SPEAKERPHONE
To switch from the handset to the speaker-
phone, press
SPKPHONE/HEADSET
turn the handset to the cradle.
To switch from the speakerphone to the
handset, just lift the handset.
To switch from the speakerphone to the
handset during redialing or memory dialing,
let the number dial completely, then lift the
handset.
To switch from the handset to the speaker-
phone during redialing or memory dialing, let
the number dial completely, then press
PHONE/HEADSET
the cradle.

USING A HEADSET

For hands-free calling, you can connect an
. optional headset to the telephone. Contact
your local RadioShack store for a suitable
headset.
Note: If the headset is connected and there
is AC power, the phone automatically switch-
es to headset mode even if the handset is
lifted. When there is no AC power, the head-
set only works if the handset is picked up.
.
or
VOLUME
To switch from the headset to handset, pick
up the handset and unplug the headset from
the phone to make or receive a call.
, then re-
Operation
and return the handset to
1. Insert the headset's plug into the
jack at the left side of the phone.
SET
2. Press
SPKPHONE/HEADSET
lifting the handset to make or answer
calls. To override automatic line selec-
tion, press the desired
instead of pressing
. You will be connected to that line
SET
with the headset.
3. Press
SPKPHONE/HEADSET
hang up.
SPK-
HEAD-
instead of
button
LINE
SPKPHONE/HEAD-
again to
7