Switching Between The Handset And Speakerphone; Using Both The Handset And Speakerphone; Using Flash - Radio Shack TAD-725 Owner's Manual

Digital answering system 900mhz cordless speakerphone
Table of Contents

Advertisement

43-725.fm Page 16 Tuesday, February 23, 1999 2:47 PM
To adjust the speakerphone's volume,
repeatedly press
VOLUME
the base. The volume setting from
(lowest) to
(highest) appears in the
10
message counter window.
To end a speakerphone call, press
again.
SPEAKER
SWITCHING BETWEEN
THE HANDSET AND
SPEAKERPHONE
To switch to the speakerphone while
you are using the handset, press
on the base. When you hear
SPEAKER
the conversation on the speakerphone,
press
on the handset.
TALK
To switch to the handset while you are
using the speakerphone, simply lift the
handset off the base. If the handset is
away from the base, press
press
.
SPEAKER
16
USING BOTH THE
or
on
HANDSET AND
1
SPEAKERPHONE
If someone else is using the speaker-
phone, press
join the conversation. If someone else is
using the handset, press
the base to join the conversation.
VOLUME
During the call, one person can hang up
and let the call continue at the other key-
pad. Or, both people can hang up to end
the call.
Note: If you hear a high-pitched noise
from the base's speaker, the handset
and the base are too close together.

USING FLASH

FLASH
lent of a switchhook operation for spe-
cial services, such as Call Waiting.
, then
TALK
For example, if you have Call Waiting,
press
FLASH
without disconnecting the current call.
Press
call.
on the handset to
TALK
SPEAKER
performs the electronic equiva-
to answer an incoming call
again to return to the first
FLASH
on
FLASH

Advertisement

Table of Contents
loading

This manual is also suitable for:

43-725

Table of Contents