RS-232 port
To establish communication between the uninterruptible power supply and a
computer, connect one end of the serial communication cable that comes with the
uninterruptible power supply to the RS-232 port on the uninterruptible power supply.
Connect the other end of the serial cable to the RS-232 port on a computer.
The cable pins for the RS-232 connector are identified in the following illustration.
The pin functions are described in Table 10 on page 31.
30
1000 VA and 1500 VA LCD Tower UPS: Installation and Maintenance Guide
RS-232
5 4 3 2 1
connector
9 8 7 6
REPO