System Status; Alarm History; Meters - IBM 1000 VA LCD Installation And Maintenance Manual

System status

The System Status provides the following information:
v Battery status, including state and change level
v Status summary (load percentage, output power, output voltage and frequency,
v Notice or alarm status, if any are present
If the message ALARM is displayed, press the down (
notices, alarms, and battery status messages. For more information, see Table 6
and Chapter 6, "Troubleshooting," on page 41.
The following table describes the available battery status messages. Only one
battery status is available at a time.

Alarm history

The alarm history holds up to 50 events. You can scroll through the event screens,
beginning with the most recent event.
Note: The date format is dependent on the language selection.
The first row of each alarm history screen contains the date (MM/DD/YYYY) and
time (hh:mm:ss) at which the event occurred. The second row contains the type of
event and code. The event description begins on the third row and might continue
to the fourth row. The bottom-right corner of the alarm history screen displays two
numbers: an ordering number of the event in the log, followed by the total number
of events in the log.
If there are no events in the log, the message No events in log is displayed on the
alarm history screen.
For more information, see "Retrieving the alarm history" on page 25.

Meters

The meters screens provide the following meters information:
v Output watts, VA, current, power factor, voltage, and frequency
v Input voltage and frequency
v Battery voltage and percentage charged
22
1000 VA and 1500 VA LCD Tower UPS: Installation and Maintenance Guide
and mode)
Table 6. Battery status messages
Battery status Description
Battery charging Batteries are charged in constant current mode.
Battery floating Batteries are charged in constant voltage mode.
Battery resting Batteries are connected but are not being charged or discharged.
(This is part of the normal charging cycle.)
Battery discharging Batteries are discharging.
Battery disconnected Batteries are unavailable because they are disconnected.
) button to display the active