Redundant Hot-Plug Power Supply Option - HP ProLiant DL380 G6 User Manual

Power up the server (on page 22).
9.

Redundant hot-plug power supply option

CAUTION:
all bays are populated with either a component or a blank.
Access the product rear panel (on page 24).
1.
Remove the power supply blank.
2.
WARNING:
power supply blank to cool before touching it.
Install the power supply in the power supply bay.
3.
Connect the power cord to the power supply.
4.
To prevent improper cooling and thermal damage, do not operate the server unless
To reduce the risk of personal injury from hot surfaces, allow the power supply or
Hardware options installation 52