Computer Setup-Main - HP TouchSmart 9100 Maintenance And Service Manual

●
Boot
●
Power
●
Exit
Use the arrow keys to select the appropriate heading, then press Enter. Use the arrow (up and
down) keys to select the option you want, then press Enter. To return to the previous screen, press
Esc.
4. To apply and save changes, press the
If you have made changes that you do not want applied, press the
values.
CAUTION:
(F10) changes because the CMOS could become corrupted. It is safe to turn off the computer only after
exiting the F10 Setup screen.
Table 5-1 Computer Setup (F10) Utility Main Menu
Heading
Main
Advanced
Boot
Power
Exit
Computer Setup—Main
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 5-2 Computer Setup—Main
Option
System Time
System Date
Language
Floppy Diskette A:
Do NOT turn the computer power OFF while the ROM is saving the Computer Setup
Description
Allows you to set system time.
Allows you to set system date.
Allows you to select language.
Allows you to set drive A to:
●
Disabled
●
1.44 MB 3.5"
●
Not Installed
F10 key.
Table
Computer Setup—Main on page 51
Computer Setup—Advanced on page 52
Computer Setup—Boot on page 54
Computer Setup—Power on page 53
Computer Setup—Exit on page 55
F5 key to return to the default
Computer Setup (F10) Utilities
51