HP TouchSmart 9100 Maintenance And Service Manual page 33

8. Partially remove the left side cap by lifting it straight up and off the computer and resting it next to
the computer with the cables attached.
9. Locate the Bluetooth holder and module assembly.
10. Push in on the side of the Bluetooth holder, and pull the holder off the computer.
11. Unplug the Bluetooth cable from the Bluetooth module, and then remove the holder assembly from
the computer.
12. Remove the Bluetooth module from the holder by pulling on the small arm at the mouth of the
holder, and then sliding the module out of the holder.
Bluetooth module
25