IBM 2196 User Manual page 204

The steps in the following tables always start at the Configuration/Setup
Utility program main menu.
Table 3 (Page 1 of 4). Network-related settings
To configure:
Remote
Administration
Ethernet
adapter
Automatic
Power On
Startup
Sequence
Wake on LAN
16
Type 6344 User Guide Update
Select:
1. System Security
2. Remote Administration
3. Enabled or Disabled
1. Start options
2. Network Setup
3. Network boot F12
option
4. Enabled or Disabled
1. Start Options
2. Startup Sequence
3. Automatic Power On
Startup Sequence
4. Enabled or Disabled.
If you select Enabled,
continue to the next
step.
5. Select the first, second,
third, and fourth
startup devices.
1. Power Management
2. Automatic Power On
3. PCI Wake Up and
press Enter.
4. Enabled or Disabled.
If you select Enabled,
continue to the next
step.
5. Startup Sequence
6. Primary or Automatic.
Go back to the main
menu.
7. Start Options
8. Startup Sequence
9. The first, second, third,
and fourth primary
startup devices
10. Automatic Power On
Startup Sequence
11. The first, second, third,
and fourth startup
devices
Comments:
Enable Remote
Administration to allow
POST/BIOS updates over
the LAN.
You might not be able to
select four startup devices
for your model.
You might not be able to
select four startup devices
for your model.