IBM ADSL Bridge/ Router Heritage User Manual page 68

Heritage Series ADSL Bridge/ Router
Command Sets for Command Line Interface
When the console is at the prompt of a particular process, the
command "
home <command>
used to execute a command as if the user had typed "home" followed
by " " or "
<command>
will remain at the same process prompt. The command "
" will change the prompt from the current process to a new
<process>
process "
<process>
Example:
DSL> conifg
DSL config> help
Commands are:
print reset
Type 'help all' or 'help <command>' for more details
DSL config> home help
Commands are:
dsl bridge
isfs nat
system
Type 'help all' or 'help <command>' for more details
DSL config> home flashfs help
Commands are:
cat ls
Type 'help all' or 'help <command>' for more details
DSL config> home isfs
DSL isfs> help
Commands are:
ls rm
Type 'help all' or 'help <command>' for more details
DSL isfs> home
DSL>
2. help
Syntax:
help
help <cmd>
help all
<process> help
<process> help <cmd>
<process> help all
Description:
Displays a summary of available commands, more detailed
information on a particular command, or more detailed information
on all commands.
Example:
" or "
home <process> <command>
<process> <command>
".
save
config flashfs
ppp restart
update
cat
7-3
" may be
". However, the console
home
ip
snmp