IBM ADSL Bridge/ Router Heritage User Manual page 49

4-4
4.2 Enables NAT to RFC1483, Classic IP (RFC1577),
PPP over ATM (RFC2364), PPP over Ethernet
(RFC2516) in Routing mode
The xDSL Router can be setup to adding NAT protocol to a Routing Mode
configuration like RFC1483, RFC 1577, RFC 2364 or RFC 2516 with
following procedure. The following procedure must be typed after
command ( in RFC1483, RFC 1577, RFC 2364 or RFC2516
device add
configure procedure) have been given and the xDSL Router restarted.
[System configuration]
PC 1
202.1.136.1
PC N
202.1.136.100
[ISP/DSLAM configuration]
IP address :
Subnet mask :
Gateway :
[Local PC 1 configuration]
IP address :
Subnet mask :
Gateway :
[Local PC 8 configuration]
IP address :
Subnet mask :
Gateway :
Advanced Configurations
Ethernet Port
HUB
192.168.102.3
255.255.255.0
192.168.102.2
202.1.136.1
255.255.255.0
202.1.136.254
202.1.136.100
255.255.255.0
202.1.136.254
ip
192.168
Ethernet Port
202.1.136.254
.102.2
Up-Link
192.168.102.3
DSLAM/NSP