Table of Contents
Advertisement
Heritage Series ADSL Bridge/ Router
preference.
option netbios-name-servers
The NetBIOS name server (NBNS) option specifies a list of RFC
1001/1002 NBNS name servers listed in order of preference.
option netbios-dd-server
The NetBIOS datagram distribution server (NBDD) option specifies a
list of RFC 1001/1002 NBDD servers listed in order of preference.
option netbios-node-type
The NetBIOS node type option allows NetBIOS over TCP/IP clients
which are configurable to be configured as described in RFC
1001/1002. The value is specified as a single octet which identifies the
client type. A value of 1 corresponds to a NetBIOS B-node; a value of
2 corresponds to a P-node; a value of 4 corresponds to an M-node; a
value of 8 corresponds to an H-node.
option netbios-scope
strin
The NetBIOS scope option specifies the NetBIOS over TCP/IP scope
parameter for the client as specified in RFC 1001/1002. See RFC1001,
RFC1002, and RFC1035 for character-set restrictions.
option font-servers
ip-address [, ip-address ...
This option specifies a list of X Window System Font servers available
to the client. Servers should be listed in order of preference.
option x-display-manager
This option specifies a list of systems that are running the X Window
System Display Manager and are available to the client. Addresses
should be listed in order of preference.
option dhcp-client-identifier
This option can be used to specify a DHCP client identifier in a host
declaration, so that DHCP can find the host record by matching
against the client identifier. (Also used by the client in a
dhcp-client-identifie
DHCP Server Operation
ip-address [, ip-address ...
ip-address [, ip-address ...
uint
8;
g;
];
ip-address [, ip-address ...
data-strin
g;
r" declaration to supply its identifier to the server)
8-17
];
];
];
"send
Advertisement
Table of Contents
