IBM ADSL Bridge/ Router Heritage User Manual page 39

3-8
(use the same VPI/VCI of RFC 1577 setting)
↵
> config save
↵
> restart
Remove all existing IP module configuration device
↵
> home
> ip device flush
> config save
↵
> restart
We are ready for RFC1577 setup
Specify the gateway (RFC1577 on ISP/DSLAM site and Ethernet on local
PC site)
↵
> home
> ip device add ethernet ether //edd 202.1.136.254
> ip device add ipoa atm //atm 192.168.1.2
> config save
↵
> restart
Enable forwarding between router interface
> home ↵
> ip relay all ↵
> ip ipatm pvc add ipoa r1483 x/y remoteip 192.168.1.1 ↵
(' x' is the VPI, ' y' is the VCI. Check with your service provider)
> config save ↵
> restart ↵
Basic Configurations
↵
↵
↵
↵
↵