Table of Contents
Advertisement
4-10
Now add the new settings for DHCP client.
> ip device add Ethernet ether //edd dhcp ↵
> dhcpclient config add timeout 300; ↵
> dhcpclient config add retry 2000; ↵
> dhcpclient config add reboot 500; ↵
> dhcpclient config add backoff-cutoff 240; ↵
> dhcpclient config add interface "ethernet" { send
dhcp-client-identifier xx:xx:xx:xx:xx:xx; send dpch-lease-time 900; }
↵
(xx:xx:xx:xx:xx:xx is the Ethernet Mac address of your xDSL Router)
> dhcpclient config confirm ↵
(confirm the new configuration)
> config save ↵
(save the new configuration)
> restart ↵
(after restart new configuration will take effect)
Advanced Configurations
Advertisement
Table of Contents
