Panasonic Lumix DMC-GF1 C Operating Instructions Manual page 92

Advanced (Recording pictures)
Ni\ME I
ON
-··~--~·'"~·1
L~_
SELECT':
Name:
• Birthday/Name setting
1
Press £./"'( to select [AGE] or [NAME] and then press
~.
2
Press £./"'( to select [SET] and then press [MENU/SET].
3
Enter the birthday or name.
Birthday:
~/~:
Select the items (year/month/day).
£./"'(: Setting.
[MENU/SET]: Exit.
For details on how to enter characters, read the
[TITLE EDIT] section on P135.
- When the birthday or name is set, [AGE] or [NAME] is automatically set to [ON].
- If [ON] is selected when the birthday or name has not been registered, the setting screen
appears automatically.
4
Press [MENU/SET] to finish.
- You can also use the rear dial to set.
• To cancel [AGE] and [NAME]
Select the [OFF] setting in step
2
of the "Birthday/Name setting" procedure.
_Note
- During Motion Picture Recording, settings for [PORTRAIT] are used.
- The age and name can be printed out using the "PHOTOfunSTUDIO 4.0 HD Edition" bundled
software on the CD-ROM (supplied).
-If [AGE] or [NAME] is set to [OFF] even when the birthday or name has been set, the age or
name will not be displayed. Before taking pictures, set [AGE] or [NAME] to [ON].
-Intelligent ISO sensitivity control is activated, and maximum ISO sensitivity level becomes
[IS0400].
- If the camera is turned on with [BABY1 ]/[BABY2] set, the age and name are displayed at the
lower left of the screen for about 5 seconds, along with the current date and time.
-If the age is not properly displayed, check the clock and birthday settings.
- The Birthday Setting and Name Setting can be reset with [RESET].
- The initial setting for [AF MODE] is
[=.&l
Select this when you want to take pictures of a pet such as a dog or a cat.
You can set your pet's birthday and name. You can select to have these appear at the time
of playback, or have them stamped on the recorded image using [TEXT STAMP] (P136).
For information about [AGE] or [NAME], refer to [BABY1]1[BABY2] on P91.
_Note
- It will be a normal motion picture recording during the motion picture recording.
- The initial setting for the AF assist lamp is [OFF].
-Intelligent ISO sensitivity control is activated, and maximum ISO sensitivity level becomes
[IS0800].
- The initial setting for [AF MODE] is
[r~:;].
- Refer to [BABY1]/[BABY2] for other information about this mode.
n[PARTY]
Select this when you want to take pictures at a wedding reception, an indoor party etc.
This allows you to take pictures of people and the background with near real-life
brightness.
92
VQT2G44