Panasonic Lumix DMC-GF1 C Operating Instructions Manual page 179

Others
• The LCD monitor turns off when [AUTO LCD OFF] (P32) is selected for the [ECONOMY] mode.
[This does not happen when using the AC adaptor (P164).]
If the remaining battery power is low, it may take longer for the flash to be charged, and the
time during which the LCD monitor is turned off may become longer.
~j;*~~·',~~.B;;m~~~~~~le;p~~~~~":~~~~~~.";~~,,,:;,,,,:c~,~":,~,
~ Adjust the brightness of the LCD monitor/Optional External Viewfinder to a proper level.
(P33)
• [POWER LCD] is activated. (P33)
• Is the LCD monitor switched off?
~
Switch the display by pressing [DISPLAY]. (P55)
• Does the picture appear on the Optional External Viewfinder?
~
Switch to LCD monitor display by pressing [LVF/LCD] on the Optional External Viewfinder
(P159).
r ,•.
"""":"!X"3';'''''';':~;i~~~i~";it;~p~i:
.,.
;<1M,~.{;<,,~~~ti;!;, n:·}:,<+!~J~~',~~R~~;!'~~~~:.
• It is only displayed on the LCD monitor when the camera is connected to a PC or printer.
• This is not a malfunction.
These pixels do not affect the recorded pictures.
·In
dark places, noise may appear to maintain the brightness of the LCD monitor.
• This is a characteristic of the drive system of the Optional External Viewfinder (P159) of this
unit, and it is not a malfunction. There will be no problem with the recorded image.
;~j:j;~:'
, . . '
~~If~~~~'i·.;,
..
H;;;,';< .
• You can display the pictures without being rotated when [ROTATE DISP.] (P141) is set to
[OFF].
• You can rotate pictures with the [ROTATE] function. (P141)
• You can only display the pictures rotated if you use a lens (P15) that supports the Direction
Detection Function (P37) and [ROTATE DISP] is set to [ON].
VQT2G44
179