Download Print this page

Panasonic Lumix DMC-GF1 C Operating Instructions Manual page 100

Digital camera/lens kit body
Hide thumbs Also See for Lumix DMC-GF1 C:

Advertisement

~
[i-PORTRAIT]
Ie
[i-SCENERY]
If]
[i-LOW LIGHT]
~
[i-MACRO]
Advanced (Recording pictures)
- [FACE RECOG.]/[EX. OPT. ZOOM]/[ISO LIMIT SET]/[DIRECT AF AREA]
·It is recommended to use a fully charged battery or AC adaptor (P164) when recording motion
pictures.
• If while recording motion pictures using the AC adaptor (P164) the power supply is cut off due
to a power cut or if the AC adaptor is disconnected etc., the motion picture being recorded will
not be recorded.
• Color or brightness of the screen may change or horizontal streaks may appear on the screen
when the picture is taken under extremely bright light, or under fluorescent lamps, mercury
lamps, or sodium lamps etc.
• When Intelligent Auto Mode is selected in step
1,
motion picture recording matching to the
subject or recording situation can be performed .
• Scene detection
When the camera identifies the optimum scene, the icon of the scene concerned is
displayed in blue for 2 seconds, after which its color changes to the usual red.
IB~
• [1fl1]
is set if none of the scenes are applicable, and the standard settings are set.
• When
[1[iJ]
is selected, the camera automatically detects a person's face, and it will adjust the
focus and exposure. (Face Detection) (P72)
8
Note
• Refer to P43 for settings in Intelligent Auto Mode.
• Due to conditions such as the ones below, a different scene may be identified for the same
subject.
- Subject conditions: When the face is bright or dark, The size of the subject, The distance to
the subject, The contrast of the subject, When the subject is moving
- Recording conditions: Sunset, Sunrise, Under low brightness conditions, When the camera is
shaken, When zoom is used
• To take pictures in an intended scene, it is recommended that you take pictures in the
appropriate recording mode.
• Functions enabled for motion picture recording are different to those enabled for still picture
recording.
Changing [REC MODE] and (REe QUALITY)
D
Select [REC MODE] from the [MOTION PICTURE]
mode menu, and press
~.
(P28)
100
VQT2G44

Advertisement

loading