Panasonic Lumix DMC-GF1 C Operating Instructions Manual page 181

Others
;::IW!~~;~,;.~t!~~,,~~~~t~:.;,:;
- Is the camera connected to the TV correctly?
~
Set the TV input to external input mode.
- Output from the [HOMI] socket is not possible when it is connected to the PC or the printer.
~
Connect it only to the TV.
- Depending on the TV model, the pictures may be extended horizontally or vertically or they
may be displayed with their edges cut off.
- Are you trying to play back the motion pictures by directly inserting the card in the card slot of
the TV?
~
Connect the camera to the TV with the AV cable (supplied), or with the HOMI mini cable
(optional), and then play back the motion pictures on the camera. (P146, 147)
~ Motion pictures recorded in [AVCHD Lite] can be played back on Panasonic televisions
(VIERA) with the AVCHD logo.
·":::~~~.!~!ffl:.,
' .
~
Check [TV ASPECT] setting. (P35)
-Is it connected properly with the HDMI mini cable (optional)? (P147)
~
Confirm that the HDMI mini-cable (optional) is firmly fitted.
~
Press [eE] on this unit.
-Is the [VIERA Link] on this unit set to [ON]? (P35)
~
Depending on HDMI terminal of the TV, the input channel may not switch automatically. In
this case, use the remote control for the TV to switch input. (For details on how to switch
input, please read the operating instructions for the TV.)
~ Check the VIERA Link setting on the connected device.
~ Turn the power to the unit off and then back on again.
~
Set [VIERA Link] to [Off] on the TV and then turn it back to [On]. (Refer to the operating
instructions of the TV for details.)
- Is the camera connected to the PC correctly?
-Is the camera recognized by the PC correctly?
~ Set to [PC] in [USB MODE]. (P34, 153)
~
Disconnect the USB connection cable. Connect it again while the card is inserted in the
camera.
- Pictures cannot be printed using a printer which does not support PictBridge.
~ Set to [PictBridge(PTP)] in [USB MODE]. (P34, 155)
VQT2G44
181