Panasonic Lumix DMC-GF1 C Operating Instructions Manual page 52

Basic
You can display pictures by recording date.
g
Rotate the rear dial left to display the
calendar screen.
f)
Press
A/T I .....
/~
to select the date to be played back.
.. IT:
Select the month
....
/~:
Select the date
• If there were no pictures recorded during a month, the month is not displayed .
m
Press [MENU/SEn or the rear dial to
"" display the pictures that were recorded on
the selected date.
• Rotate the rear dial left to return to the calendar
screen display.
•
or
D
Press A/T
1<tt4/~
to select a picture and then press [MENU/SET] or
the rear dial.
• The picture that was selected will appear.
o
Note
• The recording date of the picture selected in the playback screen becomes the date selected
when the calendar screen is first displayed.
• If there are multiple pictures with the same recording date, the first picture recorded on that day
is displayed.
• You can display the calendar between January 2000 and December 2099.
• If the date is not set in the camera, the recording date is set as January 1st, 2009.
• If you take pictures after setting the travel destination in [WORLD TIME), the pictures are
displayed by the dates at the travel destination in Calendar Playback.
• " • 0 ' • " , " • , - . . . ' , ' ' . ' . : "
."sl~1
t_e
Ital.aCk:"l~olR'
.' ." ' .
.... ,
,~""
. . " ' h
~ ~ "
> ' " ,
~"
, . . , " > ' '" ,
Rotate the rear dial right.
1
x~2x~4x~8x~16x
• When you rotate the rear dial left after enlarging the picture,
the magnification becomes lower.
• When you change the magnification, the zoom position
indication
®
appears for about 1 second, and the position of
the enlarged section can be moved by pressing
./T
1....1...
• The more a picture is enlarged, the more its quality
deteriorates.
• When you move the position to be displayed, the zoom
position indication appears for about 1 second.
52
VQT2G44