Panasonic Lumix DMC-GF1 C Operating Instructions Manual page 136

Advanced (Playback)
• Delete the title
[SINGLE] setting
1
In step
4,
delete all the texts, select [EXIT], and press [MENU/SET].
2
Press
[lID].
3
Press [MENU/SET] to close the menu.
[MULTI] setting
1
Select [EXIT] without entering text in step
4,
and then press [MENU/SET].
2
Press [MENU/SET] to close the menu.
_Note
• Text can be scrolled if all of the registered text does not fit on the screen.
• The name setting of [FACE RECOG.] or [BABY1 ]/[BABY2] and [PET] in Scene Mode or
[LOCATION] in Travel Date can also be registered by using the operation in steps
4
and
following.
• The name setting of [BABY1]/[BABY2] or [PET] in Scene Mode, [LOCATION] in Travel Date
and [TITLE EDIT] cannot be registered at the same time.
• You can print out texts (comments) using the "PHOTOfunSTUDIO 4.0 HD Edition" bundled
software on the CD-ROM (supplied).
• You can set up to 50 pictures at one time with [MULTI].
• You cannot use title edit for the following pictures.
- Motion pictures
- Protected pictures
- Pictures taken with [RAW===], [RAW.:.] or [RAW]
- Pictures recorded with other equipment
You can stamp the recording date/time, age, travel date or title onto the recorded pictures.
It is suitable for regular size printing. (Pictures with a picture size larger than [S) will be
resized when stamping the date etc. on them.)
o
Select [TEXT STAMP] on the [PLAYBACK] mode menu. (P28)
fJ
Press . / . to select [SINGLE] or [MULTI] and then
press [MENU/SET].
Press ....
/~
to select Press ..
IT I .... /~
to
the picture. select the pictures.
II
Select the picture, and then
press [MENU/SET] to set.
•
[~]
appears on screen if the picture is
stamped with text.
[MULTI] setting
Press [DISPLAY] to set (repeat), and
then press [MENU/SET] to set.
• The setting is canceled when
[DISPLAY] is pressed again.
136
VQT2G44
[SINGLE) [MULTI)