Subaru Forester 2004 Service Manual page 62

Step
6 CHECK HARNESS BETWEEN ECM AND IG-
NITION COIL & IGNITOR ASSY CONNEC-
TOR.
Measure the resistance of harness between
ECM and engine ground.
Connector & terminal
(B135) No. 15 — Engine ground:
(B135) No. 16 — Engine ground:
(B135) No. 17 — Engine ground:
(B135) No. 18 — Engine ground:
7 CHECK POOR CONTACT.
Check poor contact in ECM connector.
Diagnostics for Engine Starting Failure
Is the resistance more than 1
MΩ?
Is there poor contact in ECM
connector?
EN(H4DOTC 2.5)-61
Check
Go to step 7.
Repair the poor
contact in ECM
connector.
ENGINE (DIAGNOSTIC)
Yes No
Repair ground
short circuit in har-
ness between
ECM and ignition
coil & ignitor ASSY
connector.
Check fuel pump
circuit. <Ref. to
EN(H4DOTC 2.5)-
62, FUEL PUMP
CIRCUIT, Diag-
nostics for Engine
Starting Failure.>